Description
Align BeastX MicroBeast Plus Flybarless System HEGBP301T
Microbeast plus is based on the popular Microbeast and starts the next level of BeastX flybarless revolution. MEMS sensors of the latest generation measure the aircraft's rotational movement with unprecedented precision and transmit the data digitally and in real time to the control system. These new sensors are insensitive to typical vibrations of a model helicopter. The housing made of plastic composite material keeps the weight of Microbeast plus sensationally low.
The high-end Microbeast PLUS 6-axis gyro with 32-bit high-speed processor is much precise and superior in programming and computing allow for significant handling performance and delicate response. In addition, the Microbeast PLUS gyro is vibration-reducing improvement and strongly reduce the effects of the vibration to flying performance.
For your first time, please click into the Helicopter Setup to start running process. After all the setup is done, then start Flight Parameter Setup.Only after the Helicopter Setup is all done, then the Flight Parameter Setup is permitted.
If assembling and operating the helicopter without using ALIGN standard equipment, including electronic equipment & blades…etc, please make sure there is a sufficiently large and stable power supply to your helicopter. If any abnormal voltage or insufficient power supply, suggest to upgrade the flybarless system to MICROBEAST PLUS HD for better power back up. (Please refer to BEASTX website for MICROBEAST PLUS HD assembly and setup instruction.)
Any over use, incorrect setup, assembly, modification or misuse will lead to abnormal voltage, electronic devices damage, structural interference, and insufficient power supply. Make sure to carefully check every assembly and setup refer to the manual instruction prior to every flight to prevent any unforeseen danger.
Specifications
Servo center pulses:
Swashplate: 1520µs
Rudder: 1520µs, 960µs, 760µs
Servo pulse rates:
Swashplate: 50 - 200Hz
Rudder: 50 - 560Hz
Swashplate mixing:
mCCPM, eCCPM: 90, 120, 135, 140
Swash phasing (by using StudioX)
Input signals:
Single channels
PPM serial pulse
SRXL (JR XBus, SUMD, M-Link...)
Futaba S.Bus/S.Bus2
Spektrum Remote Receiver* (DSM2/DSMX) with Spektrum Remote Receiver adapter
Processor:32 Bit ARM
Sensor:6-Axis MEMS (Gyro + Accelerometer)
Dimensions:36 x 25 x 21mm
Weight (w/o wiring):19g