Digitech CTU Central Telemetry Unit for Jeti, Works with Jetcat, JetCentral, Kingtech, EvoJet, Xicoy & JetsMunt
This unit is the central unit for your model , and it can connect lots of electronics and engines. Standard has G sensor and Altimeter sensor on board. Jeti-intregation1 x CAN bus (for CAN bus based sensors read more below)
Descripton.
ATTENTION JETI USERS Please Download the Bin file for your Transmittor HERE copy this file into the "devices"map on your Transmittor
1 x CAN bus (for CAN bus based sensors read more below)
2 x Engine inputs (Jetcat-Projet input / Serial input Kingtech fadec AMT etc etc)
2 x Extra EX / sensor ports to add more Jeti sensors OR you can set one as a servo output or smokepump or extra valves.
1 x USB port For upgrades
1 x SD card slot for Logging realtime your tubine and other stuff you want to log realtime.
1 x 3D G-sensor on board (up to 24G)
1 x Altimeter sensor on board (with tube connection to static port).
Will have like the old TTU:
Fuel consumption
Reset fuel counter
Full LUA app to show and voice speech for status messages comming from engine ECU.
Full array of engine parameters can be shown on your DS24/DC24, but most will probably use the LUA application.
CAN bus
This will open a complete new line of possibilities, stay tuned
Contains : CTU / Servo Patch cable / Static port M3 nipple.
CHECK if you need a adaptor!!
Please find the CTU Manual here: Manual
Latest Firmware and software
11-12-2018 Added JetCentral
Lua Version 1.6 Single and Twin engine version. 11-12-2018
Download
Big File! remember : unpack this zip and copy the Digitech folder and the 2 lua files to your APPS folder on your TX sd Card.
when asked : overwrite!
------------------------------------------------------------------
Firmware : Version 0.92 (Added JetCentral) 11-12-2018)
Copy this file (DO NOT rename it!) onto a sd card , insert in CTU/ power on.
after 10 seconds when CTU is booted you can remove the card.
Download
JETI Device Bin file version 0.92
you need to copy this file into the SD card of your Transmittor folder "Devices" over write the old one.
Download