Futaba R7003SB Receiver - S-Bus (HV) 2.4GHz FASSTest
The Futaba R7003SB primarily developed for use in helicopters but equally suitable for fixed wing models, this tiny full range FASSTest receiver weighs in at only 7.2g!
The R7303SB telemetry enabled receiver, a high-voltage design that operates up to 3 channels using the 3 standard PWM outputs or up to an incredible 18 channels (16 proportional + 2 digital) using the S-Bus port. That means a simpler setup and full support for S-Bus and S-Bus2 servos.
As supplied the R7303SB receiver includes integral sensors for receiver voltage, signal strength and external voltage, with further separate sensors available separately.
Although originally developed for use in helicopters it is equally suitable for fixed wing models especially those fitted with a Powerbox due to its S-bus output and this tiny full range FASSTest receiver weighs in at only 7.2g!
|
|
|
Channels: |
3 Channel (18 S-Bus) |
|
Dimensions: |
37.4 x 22.5 x 9.3mm |
|
Built-in telemetry — incomparable versatility.
Telemetry isn't the only feature that sets the R7003SB apart from other receivers.
Its flexibility is unequaled. The R7003SB allows you to select from 11 modes of operation. Instead of using ports 1 and 2 for channels 1 and two, you can program them to operate channels 1 and 5 instead. But you can also use port 1 as the S.Bus or S.Bus2 port...or choose from eight other configurations
The chart at right shows all 11 possibilities. And picking the one that's right for you is as easy as programming it into the R7003SB.
Features
- Small and lightweight
- Includes programmable ports
- Included cable lets you monitor the voltage of an external (non-Rx) battery
- Full-range receiver
- Dual-Antenna Diversity
- Continuous Channel Shifting
- Pre-Vision
|
|
R7003SB CH Mode Table
|
|
FUTL7672 Modulation: FASSTest; Type: SBus.2; programmable; bi-directional; telemetry-enabled # of PWM channels: 3 with non-S.Bus/S.Bus2 radio systems up to 18 with S.Bus/S.Bus2 systems Compatible with: FASSTest transmitters Dimensions: 1.50 x 0.89 x 0.37 in (37 x 23 x 9.3 mm) Weight: 0.25 oz (7.1 g) Includes: Futaba R70038SB FASSTest Receiver & External Voltage Cable Input Power: up to 2S LiPo Voltage Range: 3.5-8.4V (receiver) External Voltage Range: 0-70V |
Please Click Here for the Manual: