Hitec HS7954SH G2 Premium High Voltage (HV) Super Torque Servo 24 kg
The HS-7954SH could be considered the most economical high voltage, high torque, coreless servo on the market. Based on the ultra popular HS-7955TG, the HS-7954SH has the added benefit of our high voltage coreless motor. With 403 inch ounce of torque at 7.4 volts, the HS-7954SH is fast too with a 0.12 second transit time when operating on a 2 cell LiPo pack. The HS-7954SH harnesses all this power by utilizing a heavy duty case that incorporates an aluminum heat sink, hardened steel gears, and two strong steel gear pins nested in brass axial bushings. Put it all together and you get one tough high voltage servo at a price that can't be beat.
Features
- G2 Digital Circuit
- HV Coreless Motor
- Dual Ball Bearing Supported Output Shaft
- Steel Gear Train (MK first gear)
Programming Functions
- End Point Adjustments
- Direction
- Fail Safe
- Dead Band
- Speed (Slower)
- Overload Protection
- Resolution
- Data Save / Load
- Program Reset
*Select features are only programmable with the HFP-20 field programmer.
Specifications
| Performance Specifications |
| Operating Voltage Range (Volts DC) |
6.0V ~ 7.4V |
| Speed (Second @ 60°) |
0.15 ~ 0.12 |
| Maximum Torque Range oz. / in. |
333 ~ 403 |
| Maximum Torque Range kg. / cm. |
24.0 ~ 29.0 |
| Current Draw at Idle |
9 mA |
| No Load Operating Current Draw |
240 mA |
| Stall Current Draw |
3,000 mA |
| Dead Band Width |
1 µs |
| Physical Specifications |
| Dimensions (Inches) |
1.57 x 0.78 x 1.45 |
| Dimensions (Metric) |
40.0 x 20.0 x 37.0 |
| Weight (Ounces) |
2.40 |
| Weight (Gram) |
68.0 |
| Circuit Type |
G2 Programable Digital |
| Motor Type |
Coreless Metal Brush |
| Gear Material |
Steel |
| Bearing Type |
Dual Ball Bearing |
| Output Shaft (type / Ømm) |
Standard 24 |
| Case Material |
Plastic / Aluminum |
| Dust / Water Resistance |
Splash Proof |
| Connector Gauge (AWG) / Strand Count |
22 / 60 |
