UniLight 5mm PIN Navigation Light, 1.7Wx2 - White
In a new and complex manufacturing technique, high-performance LED chips are directly connected to an electrical cooling medium and additionally glued. Thus, an enormous light output can be generated and operated with a minimal chip area of only 3x3mm. The scope of delivery includes four different light caps, the two round 5mm caps correspond to the well-known light-emitting diodes, but up to 100 times the known brightness with a beam angle >120°. The cooling and mounting pin on the back is only 3mm in diameter and can be easily integrated into thin areas in rudders or the thinnest stabilizers.
The position light with 1.7W in x2 technology has an overwhelming continuous power for model flights for this size, the design allows an operating time of approx. 7-8 minutes without further cooling.
1. Cap 5mm cylindrical - can be attached directly as an all-round light
2. Cap 5mm round, focussing - attached directly, part of the light is strongly bundled forward as with the 5mm LEDs
3. Cap 7mm cylindrical - can be glued to the model and used as an alternative cover 4.
Cap 5mm profile-shaped - can be attached directly and used as a small position light
The design of the light includes an exposed LED chip, which as a ceramic carrier is quite sensitive. We additionally glue it to stabilize it mechanically, but very careful handling of the elements is always necessary until they are firmly installed in the model.
Technical Data
- Electrical: 1.7Wx2 reference power, 8(12)V, 0.15A
- Beam angle: >120°
- Luminous intensity: ~40 lumens RED
- Luminous intensity: ~80 lumens GREEN
- Luminous intensity: ~150 lumens WHITE
- Dimensions: D5x34mm
- Weight: 2g (without cable)