Cortex 3 Axis Aircraft Gyro Bavarian Demon
The Bavarian Demon Cortex is a Ground-breaking 3 axis stabilisation system. The Cortex Gyro is high quality, reliable and universal. Whether a Parkflyer, 3D Acro model or turbine jet, this gyro fits every RC aircraft. 100% reliable sensors. The latest soft-ware algorithms. Everything in more remarkably small and CNC-milled aluminium housing. Together, these fea-tures bring the gyro to a whole new level. And they will do the same for your RC aeroplane. Whatever you do, you will notice the difference - your remote controlled aeroplane is in the air, starting and landing work per-fectly and strong or gusty winds are no longer a problem.
IMMEDIATELY 'READY TO RUN'.
SIMPLY READ IN EXISTING SIGNALS AND TAKE FLIGHT.
The Cortex does not require any PC or additional software settings - unless it is desired. You do not want to wait too long and start immediately? You can teach the existing signals such as servo, control functions and mixer settings via the stick travel and your aeroplane is ready to soar through the air. It couldn't be easier.
COMPATIBLE. UNIVERSAL. STRONG.
THE VERSATILITY LEAVES NOTHING TO BE DESIRED.
The CORTEX supports up to 5 freely selectable channels, e.g., 2 ailerons, 2 elevators and a rudder or 4 ailerons and one elevator etc. In addition to all standard receivers, the gyro CORTEX is compatible with various sum signal reception systems, such as S-bus (input), 2 spectrum/JR satellites and all PPM sum signals. Software and firmware updates can be completed in the Internet at any time.
SCOPE OF DELIVERY & GADGETS.
GREATEST POSSIBLE FLYING SATISFACTION - WITHOUT WORRIES.
Get to know the carefree demonic satisfaction of flying with a bavarianDEMON. With emphasis placed on "carefree". The bavarianDEMON is coming to you, equipped with a sensor unit, connection cable harness, mounting pads, USB connection cable and exclusive design and information material. Operating instructions and PC software are available for download under the "Service" heading at Software / Firmware and Manuals / Data Sheets. Additional spending caused by crashes are considerably reduced through a "DEMON inside" because training with this device is simply faster and more efficient. Even experienced pilots who have used CORTEX once no longer want to do without the "DEMON inside".
Bavarian Demon CORTEX incl. adhesive pads
Connection cable harness
Jumper for programming
USB PC cable not included (Available as an Accessory)
Please follow this link for the latest software update. http://www.bavariandemon.com/fileadmin/user_upload/downloads/software/bavarianDEMON_CORTEX_1.2_setup.exe
Please note: This fantastic price is due to the curent excellent exchange rate and we will try to hold this price as long as we can, rate depending.
Regular Price: £29.90
Special Price £24.99
Regular Price: £5.00
Special Price £4.50
|Manufacture's Part Number||92758|
Excellent piece of kitReview by Rexon 30/07/2017I put this into a hangar 9 christian eagle which was always a little twitchy in high winds due to the wing area.
I a very impressed with the DIFFERENCE the cortex made to the flight characteristics as the model became rock solid in the air even in very gusty conditions.
I still have some EXPERIMENTING to do with the gain settings which can only make it even better.
Will be fitting a cortex into a inverza 33 im just completing.