ER40 Version GS-200 Touch Screen Gyroscopic Landing Gear Controller and Sequencer with Brake Assist from Electron Retracts
The Electron GS 200 is programmable through an integrated color touchscreen.
Internal Gyro. It can be mixed with the steering servo output and to the differential brakes.
Dual control of electric brakes, full proportional, lineal and adjustable pulsed mode.
Differential brake mode, to steer the model using the brakes.
Steering servo processor. Gain, sense and center can be adjusted. The steering servo is centered during retraction.
8 servo outputs for the control of the doors. The endpoints of each servo can be programmed individually. The Servo speed can be programmed independent in the two senses in 0,1s resolution.
10 step sequencer. The position of the gears and the position of the 8 doors can be defined independent in each step. Step duration in 0,1s steps.
Wide choice of RC inputs. Single RC channel, Dual RC channel, Futaba SBUS, UDI Bus, SRXL Bus, JR Mode A Bus, JETI EX Bus.
SD card slot to save the settings and upgrade the software.
Battery Acording to the retract model: up to 13V for ER-30 and ER-40, and up to 10V for ER-50
Box measures: 65X45X20mm
Please follow this link for the Manual and user Video. https://www.electron-retracts.com/electronics/gs-200/
|Manufacture's Part Number||GS-200-ER40|