Loctite Hysol EA608 Epoxy 39g Tubes
Hysol 608 bonds a variety of materials including metals and plastics.
Features:
Clear
Easy to Mix
1:1 Mix by Weight and Volume
Quick Set
High Strength
Room Temperature or Heat Cure
Application: Bonding surfaces should be clean and dry. Once
the adhesive is applied, the bonded parts should be held in
contact until the part has developed handling strength. It is not
necessary to clamp the parts unless movement during cure is
likely.
Cure: Complete cure is obtained after 24 hours at room
temperature. LOCTITE® EA 608 will achieve handling strength
in 10-15 minutes at 77°F (note: this can vary with different bond
configurations). LOCTITE® EA 608 can also be fully cured with
heat such as; 5-20 minutes at a maximum of 150°F
temperature.
