Futaba SBD-2 S-Bus 8 Channel Servo Decoder
Features:
Plug the MPDX-1 into one channel of a Futaba PCM G3, PCM 1024, FM or R6014HS / 7014SB FASST receiver and get eight in return! (note: the MPDX-1 must be used with channel 11 or 12 when used with the R6014HS receiver)
All seven of the added channels are fully proportional, switch selectable - and all feature endpoint adjustment (ATV) and fail-safe!
Servo speed for each channel can be set
Easy to set up
Use two MPDX-1 units with the R6014HS or R5114DPS and gain 14 additional channels!
Works with the following transmitters: 32MZ, 18MZ, 14MZ, FX40, 12Z, 12FG (note: the 12FG requires firmware update 1.3 or greater)
Click here for the Manual:
Specifications:
Weight: 14.2g
Dimensions: 29.6x39.3x15.8mm
Operation power requirement: 4.8 or 6.0V (4~5 NiCd batteries)
Current drain: 7.5mA
Number of multi-prop output channels: 8
Applicable modulation modes: PCM-G3, PCM1024, PPM
Multiplexing scheme: Pulse width division (PCM-G3, PCM1024), time division (PPM)
Delay function: Programmable for each channel
Fail-safe function: F/S function/HOLD function can be selected for each channel.
