Graupner Vector Boards Creator MIX Box 1000 x 300
BE A CREATOR
With the Creator Mix Box, you can test the benefits of different material thicknesses and experiment with what is best for your large projects. The material in a MIX box is sufficient for about 10 Vector Planes depending on size or 20-30 hand launch models.
Included in the MIX box are:
1x8mm
1x6mm
1x3mm
1x2.5mm
1x2.0mm
1x1.50mm
2x1.0mm
2x0.8mm
2x0.5mm
2x0.2mm
Let your fantasy, your imagination and your creativity run wild with the Graupner Vector Boards.
The new Vector Boards from Graupner offer you the opportunity to develop and build your own models according to your wishes.
Whether glider, remote-controlled aircraft model, vehicle model or stand model, the Vector Board is very versatile.
The Graupner Vector Board is more robust and tear-resistant than EPP and it will also be used in future on the Vector Line models.
Application examples are offered by the respective Vector Board thiknesses.
The Graupner Vector Board in thicknesses of 10 - 30 mm is ideally suited for Parkfly model aircraft in the range above 500 g. The material is ideally suited to produce either wings or fuselages with carbon fiber reinforcement and tail planes or deep-drawn shell models.
Material Surface
We decided to make the Vector Board material as light as possible, since most of it is about flying. Since the Vector Board material is cast in blocks and then divided into the different thicknesses, the surface of the Vector Board may look slightly different depending on the thickness.
The casting creates a kind of ice crystal look with streaks in the surface.
The material thickness has a tolerance of +/- 0.1-0.3 mm.
Features:
Light
Pretty tough
Finely pored
Flexible
Tear-resistant (except for sharp-edged cuts)
Processing:
The Vector Board can be cut with the cutter or a knife or sawed with a fretsaw (fretsaw with a fine blade).
You can glue the Vector Board with UHU por, hot glue or superglue.
You can paint it with felt pens, crayons, acrylic paints, universal paints, watercolors, digital printing.
If desired, you can also deep-draw the Vector Board to create more elaborate shapes. With the hot air blower, simple shapes can be bent.
